Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help




Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 10-09-2000, 10:12 PM
Registered User
 
Join Date: Mar 2000
Posts: 217
My front, drivers side "door check strap" is shot. When i open or close the door, it makes a loud irritable "klack klack" noise. Im heading down to the dealer to pick one up (I heard they werent expensive).
My question is: How do i change it?? is this an easy process, or should i take it to a tech??


------------------
Agron
1989 300E
Monotoned Smoke Silver
97 Style Replica E420 Rims 205/55/16
Euro Headlights
Clear Corners
20% Tint
12" Sub-enclosure
Reply With Quote
  #2  
Old 10-09-2000, 11:09 PM
MBZ.Ian
Guest
 
Posts: n/a
Pritty straight forward, simply remove the inner door panal, remove 3 10mm head bolts and the pin and replace. If you want to do a nice job, paint strap with touch up first to match your vehicle.
Note - the 3 10mm bolts usally come loose, use lock tite when re-installing.


------------------
Mercedes-Benz Master Guild - 2 years
Shop Foreman - 20 + years - dealer.
Part owner - MBZ Transmission remanufacture
2000 SL500
1995 E320
1989 300SE
Reply With Quote
  #3  
Old 10-10-2000, 02:07 AM
unkl300d's Avatar
Registered User
 
Join Date: Jul 1999
Location: San Francisco, Ca
Posts: 2,267
MBZ.Ian is right. He pointed out the
same noise on my C280 a couple of months ago.
I inspected it later and found the three bolts
were loose. Upon tightening the noise was gone
and all o.k.


------------------
1979 300D
133K miles
1989 300SE
1995 C280
Reply With Quote
  #4  
Old 10-10-2000, 08:01 AM
LarryBible
Guest
 
Posts: n/a
Isn't the biggest portion and problem of this job pulling the inner door panel? My armrest is unhooked, but I hesitate to pull the panel. It doesn't seem to be straightforward like a 123 panel.

Maybe one of these days I'll get brave and tackle it. There has to be a trick to it though. Do you have to pull straight up on the panel after everything is disconnected?

Thanks,
Larry
Reply With Quote
  #5  
Old 10-10-2000, 02:40 PM
MBZ.Ian
Guest
 
Posts: n/a
Remember to remove the 2 philip screws on the seat switch (if electric). The switch stops you from being able to slide up. Also the panal sticks on the top by the inner window seal.
Good luck
Ian

------------------
Mercedes-Benz Master Guild - 2 years
Shop Foreman - 20 + years - dealer.
Part owner - MBZ Transmission remanufacture
2000 SL500
1999 ML430
1989 300SE
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
MOST Beautiful W124 AMG for SALE!!! FA22 Mercedes Cars For Sale 25 07-10-2008 04:19 AM
FS: MANY W124 Parts & more! Detailed PICTURES! GREAT Items! GREAT Deals! CHECK IT OUT FA22 Mercedes Used Parts For Sale & Wanted 22 09-09-2004 08:22 PM
Door check strap Bruce Bonds Diesel Discussion 13 07-26-2004 10:19 PM
Need part number for W124 Wagon rear hatch strap Limited Edition Tech Help 7 10-11-2003 11:37 AM
MBTex?? Leather??? YUDDY Detailing and Interior 28 04-08-2002 07:10 PM



All times are GMT -4. The time now is 12:23 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2011 Pelican Parts - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page