I'm looking to rent or buy the double row timing chain cover (stops the chain from jumping a tooth) and the tensioner pin remover. Any out there. Please contact via email @ bbeberness@aol.com. Thanks a bunch.

__________________
Ben
Chief wrench for Niki's

'84 MBZ SL380

Hello, I found this forum in a google search for tools. I'm looking for a pinion depth tool set and other needed tools to set up a dana 35c rear end.

relmdrifter@netscape.net

Take a look at what we specialize in...

__________________
I'm not a doctor, but I'll have a look.

'85 300SD 245k
'87 300SDL 251k
'90 300SEL 326k

Six others from BMW, GM, and Ford.

Liberty will not descend to a people; a people must raise themselves to liberty.[/IMG]

I'm hoping there is someone out there that just may have these tool, maybe knows where I can rent them, or even buy some cheep. (pinion depth tools $80 and up)
I know I'm going out on a limb here but it's better then the "rock and a hard place" that got me here.
Just because someone or someplace specializes in one thing does not always mean they have no knowledge or tools to do anything else.

The small DANA rear ends are incredibly similar to the w126 500/560 rear ends, close enough where I have thought about using a DANA locker in one of my pumpkins.

Anyway, try this seller, he has sold a lot of MB tools including some rear end tools recently.

http://motors.search.ebay.com/_W0QQsassZshmoog99

Also, maybe you can contact AMG-East - Member ID = jhodg5ck he could probably shim it if you need.

I need the timing chain press tool to crimp the master link. Possibilities?

Gang

I've sold my control arm removal tool to my old Mechanic in Atlanta. If you need his services, he has dealership experience and does work on the side and i'm more then happy to put you in touch with him.

__________________
With best regards

Al

I will loan the drip tool to anyone that will cover $4 for round-trip shipping (prepaid return label).

does anyone have a socket for the fuel tank strainer (46mm or 1 13/16") for rent?

__________________

I've got the 1 13/16" if you want it. No charge but shipping. I'm not sure if the cost of the socket itself is worth the double shipping charges (at least $10. round trip).

Search for "46mm socket" on eBay and you'll find several available for under $25 including shipping (some auctions could be cheaper, if you don't mind waiting). You can always re-sell it after you're done with it to recoup most of the cost. It's barely worth the hassle to ship back & forth with the new USPS rates...

I had saved a post that had a member that rented an Astoria Flexx Gun for cv boot installation. Post has been removed. Can anyone help?


---------------------
1984 MB 300SD Turbo

#3 on the rental list.

How do I go about inquiring the rental requirements of the above mentioned item from M.B.Doc?

Stark Madden

You send him a private message.