Thread: How do you remove tranny rear support adapter?
View Single Post
  #2  
Old 04-06-2011, 02:19 PM
Stretch's Avatar
Stretch Stretch is offline
...like a shield of steel
  
Join Date: Sep 2009
Location: Somewhere in the Netherlands
Posts: 14,461
Quote:
Originally Posted by netboy View Post
Seems I read on here that back nut on the tranny rear support was a 30mm deep well but I can't find the thread again. And thats the least of the problem- the 300SD adapter looks like it requires some special tool to remove the nut. Does anyone know the tools needed.....722.3, one speedo mechanical, one electric.
Er hi netboy...

I'm not sure which bit you mean. Do you mean the actual mount that holds the transmission to the chassis? (Sometimes referred to as an engine mount)

Or

Do you mean the nut on the output shaft?
__________________
1992 W201 190E 1.8 171,000 km - Daily driver
1981 W123 300D ~ 100,000 miles / 160,000 km - project car stripped to the bone
1965 Land Rover Series 2a Station Wagon CIS recovery therapy!
1961 Volvo PV544 Bare metal rat rod-ish thing

I'm here to chat about cars and to help others - I'm not here "to always be right" like an internet warrior



Don't leave that there - I'll take it to bits!
Reply With Quote