|
|
|
|
|
#1
08-18-2007, 07:18 PM
|
||||
|
||||
|
window regulator question
I'm trying to remove the rear passenger window regulator from a '85 300D. I've removed 3, 10mm nuts and detached the window but cannot pull the regulator out. It appears to be blocked by a vertical piece of metal that is attached to the bottom of the quarter glass.
Is end of the vertical piece supposed to be unattached to remove the regulator? Thanks in advance for any tips or instructions.
__________________
Geotiger '85 300D Turbo MB 
|
|
#2
08-18-2007, 07:34 PM
|
||||
|
||||
|
Remove the nut at the bottom of the door that holds the vertical piece in place. Then you can ease the regulator out. To put it in, get the regulator into the door then install the vertical piece.
__________________
"I have no convictions ... I blow with the wind, and the prevailing wind happens to be from Vichy" Current Monika '74 450 SL BrownHilda '79 280SL FoxyCleopatra '99 Chevy Suburban Scarlett 2014 Jeep Cherokee Krystal 2004 Volvo S60 Gone '74 Jeep CJ5 '97 Jeep ZJ Laredo Rudolf ‘86 300SDL Bruno '81 300SD Fritzi '84 BMW '92 Subaru '96 Impala SS '71 Buick GS conv '67 GTO conv '63 Corvair conv '57 Nomad 
|
|
#3
08-18-2007, 07:36 PM
|
|||
|
|||
|
I don't remember all the details, but in addition to unbolting the regulator from the frame, you have to unbolt the regulator from the bottom of the window. As I recall they're was one or two bolts that had to be removed.
|
|
#4
08-18-2007, 08:52 PM
|
||||
|
||||
|
Quote:
__________________
"I have no convictions ... I blow with the wind, and the prevailing wind happens to be from Vichy" Current Monika '74 450 SL BrownHilda '79 280SL FoxyCleopatra '99 Chevy Suburban Scarlett 2014 Jeep Cherokee Krystal 2004 Volvo S60 Gone '74 Jeep CJ5 '97 Jeep ZJ Laredo Rudolf ‘86 300SDL Bruno '81 300SD Fritzi '84 BMW '92 Subaru '96 Impala SS '71 Buick GS conv '67 GTO conv '63 Corvair conv '57 Nomad
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
