Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Diesel Discussion

 
 
LinkBack Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 09-24-2008, 04:37 PM
Registered User
 
Join Date: Jul 2004
Posts: 7,415
SLS high pressure hose replacement

My linkage fell off the lever near the control valve assembly and made my wagon's tail fully raise. I knew what happened immediately, but I was late for soccer practice with the kids so I left it as it. I drove there and back (6 miles RT) and by the time I got home SLS fluid was everywhere underhood. It caused the high pressure line to fail. Fluid would spray out a very small hole. I zip-tied the linkage back on. I went to the hose shop and removed the hose, they replaced the rubber hose with my hose ends. Re-install, add fluid and drive away. Total cost was $24 for the hose plus two liters of febi fluid. Works as intended.

Last edited by MTUpower; 12-01-2008 at 05:50 PM.
Reply With Quote
 

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 03:50 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page