OK, yall realize that somehow Tyler's head needs to end up on top of that pic.....

http://www.peachparts.com/shopforum/attachment.php?attachmentid=66504&d=1239452765

__________________
Jimmy L.
'05 Acura TL 6MT
2001 ML430 My Spare

Gone:
'95 E300 188K "Batmobile" Texas Unfriendly Black
'85 300TD 235K "The Wagon" Texas Friendly White
'80 240D 154K "China" Scar engine installed
'81 300TD 240K "Smash"
'80 240D 230K "The Squash"
'81 240D 293K"Scar" Rear ended harder than Elton John

What about a slide hammer with a puller attached to the end?

I have removed the axles from my truck this way.

You could always remove the housing, put it on a bench or in a vice to work on it.

__________________
AJ

1985 300D (SOLD)

If the lid is ruined, drill a hole in the middle and use a slap hammer.

__________________
85 300D turbo pristine w 157k when purchased 167,870 July 2025
83 300 D turbo 297K runs great. SOLD!
83 240D 4 spd manual- parted out then junked

This may be an English-major question, but is there any chance you've somehow created a vacuum in the filter housing? I'm not really sure why that would happen or if it even physically makes sense. Drilling a hole in the lid would fix it then.

__________________
1987 300D, arctic white/palomino--314,000 miles
1978 240D 4-speed, Euro Delivery, light ivory/bamboo--370,000 miles
2005 Jeep Liberty CRD Limited, light khaki/slate--140,000 miles
2018 Chevy Cruze diesel, 6-speed manual, satin steel metallic/kalahari--19,000 miles
1982 Peugeot 505 diesel, 4-speed manual, blue/blue, 130,000 miles
1995 S320, black/parchment--34,000 miles (Dad's car)

I'm able to break the seal with a screw driver, so I don't think that's it. Its getting dark, and I'm getting a bit too frustrated to deal with it any more this evening. Its my younger sister's 21st birthday as well, so I'm showered and heading there.

Ladies and gents the resident idiot has left the building. I will start fresh tomorrow. At least I have a few backup rides.

I don't want to have to pay my indy to remove the oil filter housing altogether and replace.

I guess better this happened with me in my driveway then Jiffy Lube.

__________________
1985 500SL Euro w/ AMG bits 130k
1984 300SD Turbodiesel 192k
1980 240D Stick China 188k
2001 CLK55 AMG 101k
2007 S600 Biturbo 149k Overheated Project, IT'S ALIVE!!!

Try knocking the cap down onto the housing,its at least possible that is cocked and binding on the studs. if its not coming up straight more force probably will not help. Don

__________________
Red Green "This is only temporary,Unless it works!"

97 E300D 157000 miles
87 300TD ?141k? miles

I think I would be concerned about drilling a hole in the lid, because it will no doubt cause aluminum filings to drop down into the filter body, where they, being non-magnetic, would be quite hard to remove.

__________________
Semibodacious Transmogrifications a Specialty

1990 300D 2.5 Turbo sedan 171K (Rudolf)
1985 300D Turbo TD Wagon 219K (Remuda)

"Time flies like and arrow, yet fruit flies like a banana"
---Marx (Groucho)

If you can get the studs out, you might be able to rotate the cap to where tou can get a grip on the ears.

__________________
Palangi

2004 C240 Wagon 203.261 Baby Benz
2008 ML320 CDI Highway Cruiser
2006 Toyota Prius, Saving the Planet @ 48 mpg
2000 F-150, Destroying the Planet @ 20 mpg



TRUMP .......... WHITEHOUSE
HILLARY .........JAILHOUSE
BERNIE .......... NUTHOUSE
0BAMA .......... OUTHOUSE

that's an idea! They twist out with vice grips?

On my iphone

__________________
1985 500SL Euro w/ AMG bits 130k
1984 300SD Turbodiesel 192k
1980 240D Stick China 188k
2001 CLK55 AMG 101k
2007 S600 Biturbo 149k Overheated Project, IT'S ALIVE!!!

that's an idea! They twist out with vice grips?

On my iphone

__________________
1985 500SL Euro w/ AMG bits 130k
1984 300SD Turbodiesel 192k
1980 240D Stick China 188k
2001 CLK55 AMG 101k
2007 S600 Biturbo 149k Overheated Project, IT'S ALIVE!!!

x2, especially if he has it 1/3 the way out, I would guess the vacuum would have been broken anyways. Good luck Tyler, let us know what happens!

__________________
TC
Current stable:
- 2004 Mazda RALLYWANKEL
- 2007 Saturn sky redline
- 2004 Explorer...under surgery.

Past: 135i, GTI, 300E, 300SD, 300SD, Stealth

There are techniques to drill to minimize filings such as coating the drill bit with grease to grab the filings. Come to think of it, he shoudn't drill in the middle because of the center shaft in the lid. He has to drill 2 holes, one on each side of the shaft. Find out the size of the screw in the slap hammer (dent puller), get a tap drill for that screw size, drill the holes but do not penetrate, then use the dent puller screw to thread into the hole and puncture through (with grease on the screw), then use the slap hammer a little at a time on each hole alternating so as not to cock the cover. Any filings that gets in can be vacuumed out and mopped up with absorbent towel.

__________________
85 300D turbo pristine w 157k when purchased 167,870 July 2025
83 300 D turbo 297K runs great. SOLD!
83 240D 4 spd manual- parted out then junked

I'm thinking that there is an O-ring there but it slipped down and got pinched between the lid and the inside of the housing.
The good thing is that since the lid is supposed to seal inside with the O-ring; a few little dings on the lid or top if the filter housing should not have an effect on the sealing as long as the lid sits flat.

__________________
84 300D, 82 Volvo 244Gl Diesel

well, its a parts car now..

Tyler,

If it was me, at this point, I would take the whole housing off. Grab a new one from a yard or off a member here. Just bite the bullet and think of it as an opportunity to put in the updated oil filter housing waffle gasket.

By the time you chisel and hack at the thing you'll have warped the cover and Id be nervous about metal chips somehow being ingested into your perfectly running motor.

Cut your time losses, done spend any more time extracting and by then you'll have the housing off. Only tough part is the 27mm wrench for the oil cooler lines.

By the way, I feel your pain. It will be over soon.

dd

__________________
-------------------------------
'85 300D, 'Lance',250k, ... winter beater (100k on franken-Frybrid 3 Valve Kit)
'82 300D, 'Tex', 228k body / 170k engine ... summer car
'83 300TD Cali Wagon 210k, wife's car