|
|
|
|
|
#1
05-11-2011, 01:01 PM
|
|||
|
|||
|
616.916 engine out of a 1976 240D
Now that I have the engine pulled, cleaned up and on an engine stand what do yall suggest I do to the engine before I install it.
This is a 616.916 engine out of a 76 240D than ran great when removed a couple months ago. I would like to do whatever I can while the engine is out that will benefit me and it in the long run. Per the paper work that came with the car I think it is a low mileage engine 130K miles but who knows. I removed the engine because of major rust to the body, car spent its whole life on beach side. The lobes on the cam shaft do have some very small grooves in it, but the darn thing ran great for the 2 years I drove the car before pulling the engine, I would think it has a long life ahead of its self. The engine did not burn any engine oil between oil changes. Adjust valves New oil pan gasket Rebuild vacuumed pump Should I replace the intake & exhaust gasket or leave it alone? I was thinking vale stem seals maybe http://www.peachparts.com/shopforum/showthread.php?t=295125
__________________
1976 240D 1976 240D parts car 1970 220D daily driver 
|
| Bookmarks |
|
|
Threaded Mode
