|
|
|
#1
|
||||
|
||||
Really Basic Engine Assembly Question
Brain-fade has struck.
On a 5 cylinder diesel engine (617-952): The rocker arms are divided into two groups – a set for 2 cylinders, and a set for 3 cylinders. I forgot which set goes toward the front of the engine, and which goes toward the rear. It seems as though they would fit in either location, but that’s not right… Plus I want to make sure that the camshaft is running on the same rocker arms as before. Thanks for the help RTH |
#2
|
||||
|
||||
You will probably get an answer before I get home and can look at the manual but I will check this evening if you have not gotten an answer and let you know.
__________________
Jim |
#3
|
|||
|
|||
The set of rockers for two cylinders (four rocker arms) are for cylinders #1 & 2. The set of rockers for three cylinders (six rocker arms) are for cylinders #3, 4, and 5. Also, the different rocker arm assemblies fit between the cam tower/bearing assemblies and the distance between the cam tower/bearing will prevent mounting the rocker assemblies in the wrong place.
Good Luck! Tom
__________________
America: Land of the Free! 1977 300D: 300,000+ miles American Honda: Factory Trained Technician & Honor Grad. Formerly: Shop Foreman; Technical Advisor to Am. Honda; Supervisor of Maintenance largest tree care co. in US for offices in Tex. |
#4
|
||||
|
||||
Thank you for the help guys – I greatly appreciate it!
RTH |
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Engine oil change silly question. | VCR | Diesel Discussion | 4 | 05-03-2004 05:42 AM |
Ignition Lock Assembly Question | diesel don | Diesel Discussion | 2 | 02-20-2004 07:05 AM |
euro headlight question, lens or assembly? | Grdenko | Diesel Discussion | 27 | 12-05-2003 12:48 PM |
500E engine origin question | pentoman | Mercedes-Benz Performance Paddock | 7 | 10-05-2002 02:29 PM |
Detailing Engine Question | LarryO | Detailing and Interior | 1 | 08-10-2001 11:43 AM |