I have the seats out of the CDI for upholstery. I got the passenger side back, and after installing it and plugging in all the cables, the seat won't respond to any of the controls. I have a temporary driver seat (from my parts car) so the car can be driven. Also, the steering column control does not work, and the steering wheel is in the lower most position. It is hard to drive like this. I checked all the fuses behind the cover on the left side of the dash, and there is power on all of them. F29 (7.5 amp) should be for the steering column module. Since I know there is power from the fuses for the seats and steering column, I can assume these accessories should work. However, they don't. Electrical systems are my weakest auto repair ability, so I am begging for help here! If there is a test or procedure I can do, I'm all ears. Thanks, Rich

__________________

All Diesel Fleet
1985 R107 300SLD TURBODIESEL
2005 E320 CDI (daily)

LOTS of parts for sale!


EGR block kit
http://www.peachparts.com/shopforum/diesel-discussion/355250-sale-egr-delete-block-off-plate-kit.html

1985 CA emissions 617 owners- You Need This!
Sanden style A/C Compressor Mounting Kit for your 616/ 617 For Sale + Install Inst.

Sanden Instalation Guide (post 11):
http://www.peachparts.com/shopforum/diesel-discussion/367883-sanden-retrofit-installation-guide.html