Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 04-11-2005, 01:42 PM
Registered User
 
Join Date: Sep 2004
Location: Las Vegas, NV
Posts: 701
w124 rear window regulator removal questions

Ok, I am perplexed. My driver side rear window is stuck in the up position, completely closed. However, I can't get the regulator/motor out to repair or replace. There is power to the motor, switches working etc. I suppose that the plastic guide that slides on the regulator shaft is gone wonky, and won't let the window down. All the posts I've read say, remove the regulator with the window down! No can do.

Can anyone tell me how to get the window down, or should I cut the cables and shaft to remove this thing, or is there another solution?

DS
87 300D
Northern Iowa

Reply With Quote
  #2  
Old 04-12-2005, 12:33 PM
Registered User
 
Join Date: Jan 2002
Location: England
Posts: 1,841
I just removed my 190E's front window regulator and it was stuck in the up position. It just required disconnecting the whole mechanism from the glass, and everywhere it attached to the door, and then quite a lot of force and leverage to get it off.. seemingly it doesn't slide onto the door bolt/hole mountings very smoothly/easily.

I couldn't even bring myself to apply that much force, so someone else did it for me..

Russ
__________________
190E's:
2.5-16v 1990 90,000m Astral Silver
2.0E 8v 1986 107,000m Black 2nd owner
http://www.maylane.demon.co.uk/190esmall.jpghttp://www.maylane.demon.co.uk/190esmall2.jpg
Reply With Quote
  #3  
Old 04-12-2005, 03:42 PM
Registered User
 
Join Date: Sep 2004
Location: Las Vegas, NV
Posts: 701
I am not sure about the front window mechanism on the 190, but on the 300, it's quite different for the rear windows. I will have to keep at it since I think the plastic slide thingy is the culprit. Those who've had this apart will know well what I'm talking about.

DS
87 300D
Northern Iowa
Reply With Quote
  #4  
Old 04-12-2005, 05:32 PM
Registered User
 
Join Date: Jan 2002
Location: England
Posts: 1,841
OK I re-read it..

Cables?

Yes, I think they're very different!

Russ

__________________
190E's:
2.5-16v 1990 90,000m Astral Silver
2.0E 8v 1986 107,000m Black 2nd owner
http://www.maylane.demon.co.uk/190esmall.jpghttp://www.maylane.demon.co.uk/190esmall2.jpg
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
1999 clk rear window regulator faulty richard28 Tech Help 0 09-14-2004 02:43 PM
88 300E rear window regulator dwnavy Tech Help 0 06-01-2003 07:07 PM
WANTED: w124 left rear window motor WANT '71 280SEL Mercedes-Benz Used Parts For Sale & Wanted 0 05-30-2003 07:27 PM
Rear window sealing - At my wits end.. any ideas???? 79300D Tech Help 1 09-02-2002 09:52 PM



All times are GMT -4. The time now is 08:00 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page