![]() |
|
|
|
|
#1
|
|||
|
|||
New 124 blower motor in, still no air flow?
Just installed new blower motor (yes it is in the correct way not backwards)
and I stll get tepid air flow out of the vents and defrost. What direction should I go, car heats up but it takes too long with no air flow Thanks David |
#2
|
|||
|
|||
Is it an airflow issue or a fan issue? Does the fan get louder when you hit "high"? If not, it could be the blower regulator or the push button unit.
|
#3
|
|||
|
|||
It stays the same. What can I do to determine which one to replace
|
#4
|
||||
|
||||
rezistor
on 124 mercedes got fuse on left fender look for one
or the rezistor undernet fan
__________________
2002 s500 white 2002 c 320 black |
#5
|
|||
|
|||
It's probably the regulator under the fan. I don't remember off hand how to test it before condemning it (I think it's pretty pricey), but I know it's been discussed in the forum.
|
#6
|
||||
|
||||
Hi David,
I had a similar problem and the blower regulator was the culprit. I found a used one on eBay for $40 and put it in. I talked to my indy mechanic about it later and he suggested not using used parts when it comes to anything electrical. There's a company in Atlanta that sells rebuilt ones. I can't find the contact details but if you do a search on regulators you might find it mentioned here. Bill
__________________
_______________________________________ 1988 MB 560 SEL 138k - Desert Taupe w/ Cream Beige Interior. Mods: Euro Headlights w/Smoked Corners New seats from a `91 ASA 15-Hole Replicas Sony HU, JL Audio 400/4 Amp, JL Audio 2-way Components on rear deck, JL Audio 3-way Components in door & dash. 2000 BMW Z3 2.3 Roadster 33k 2002 Toyota Rav4L 50k |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|