Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

 
 
LinkBack Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 07-14-2007, 03:02 PM
Registered User
 
Join Date: Jul 2007
Posts: 3
Question W215 no start problem, what to check?

Hi, hope to find some help with this.... 2000 CL500 with 65,000 miles... One morning would crank over normally, but would not start....
In order this is what I have done, with no fix..:
1. Changed the fuel filter.
2. Changed the fuel pump. (with a "VDO" parts store did show the pump was a direct replacement)
3. Recharged battery... ( Not because of low charge, just in case )
4. Pulled a "0110" error code... ( Temp. Circut malfunction)????? Wiring looks fine..
5. Removed and "cleaned" the Mass sensor.... used alcohol. Let dry for 1 hour... placed mass sensor on air intake (no housing).... nothing...
6. I have checked fuses between each of the above......
7. The car has a Brabus lowering module wich has been blinking 2 short, 3 long flashes??????
8. Suspension looks okay. Although height switch has two leds lit and sport switch is also on.....
..
If I was not getting spark, would I not get a error code?
...
Anyone have any ideas???
Thanks
Reply With Quote
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 05:41 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page