Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 08-15-2001, 08:05 PM
Tundra45
Guest
 
Posts: n/a
77 300D intermittent wipers and AC freon type

I've had my 77 300D for three years and the intermittent wipers never worked. The low and high work and also when activating the washer pump, but no intermittent. I bought a supposedly good used impulse relay P/N 123-821-00-63 from Rhinetrade and still no intermittent wiping capability. Any suggestions from the digest?

Also, does my AC use R-12 freon. I'm sure it must but want to make sure. Thanks
STEVE

Reply With Quote
  #2  
Old 08-15-2001, 11:40 PM
mburman's Avatar
Registered User
 
Join Date: Jul 2001
Location: Tampa, FL
Posts: 69
I don't know about your wipers... I just fixed mine and I just had to re-solder the connections on the relay. But as for your AC... R-134a didn't come out until around 1992 or so... so your car was designed for R-12... however it may have been converted. The only way to tell is to check the fittings for charging. They are different sizes for R-134a. Any competent A/C shop can tell you which you have. If you need to convert it, go to your local parts store and buy the $35 kit. It has everything you need. And yes, I did check with an A/C person... these kits are all you need to do the job.

Good luck!
__________________
Michael
________
71 MGB
76 450SL
________

United States Special Operations Command
Deployment Cell... Any Time, Any Place
Reply With Quote
  #3  
Old 08-17-2001, 06:44 PM
Tundra45
Guest
 
Posts: n/a
resoldering impulse relay connector

Which part of the relay did you have to resolder, the pins on the relay or the connector sockets at the end of the wire harness? Thanks

Steve
77 300D 207k mi
Reply With Quote
  #4  
Old 08-17-2001, 11:34 PM
mburman's Avatar
Registered User
 
Join Date: Jul 2001
Location: Tampa, FL
Posts: 69
re-soldering...

On the circut board where the input/output pins are soldered. Mine had worked themselvs loose. If you've already had the relay apart, see if you can rock the circut card while holding the base (with the pins) steady. If you can, try re-soldering them. I think they used a pretty heavy gauge of solder, so you'll need an iron or pencil that gets pretty hot. I used one from work with a temperature control. I found it worked best set to 800 degrees. If you're not sure about yours, go to radio shack and ask. They should be able to help you figure the wattage you need. Any luck with your A/C?

Again... Good Luck!
__________________
Michael
________
71 MGB
76 450SL
________

United States Special Operations Command
Deployment Cell... Any Time, Any Place
Reply With Quote
  #5  
Old 08-18-2001, 12:44 AM
Registered User
 
Join Date: Apr 2000
Posts: 166
A/C Conversion Kits

Apparently the R134a conversion kits will work, but before installing one, suggest you go to the following automotive air conditioning bulletin board and read what they have to say about them:

http://www.aircondition.com/wwwboard/

Good luck!

__________________
Ted
1979 240D
165,000 miles
Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 09:44 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page