I believe I have 4 bent valves in the drivers side head.
I am pulling the head to check. I have a couple of questions. Heres where Im at: I have pulled the exhaust manifold, unbolted the intake from head, pulled the 4 pins for upper guide rails, removed all the head bolts I think.
Do I have to unbolt the cam bolts? and if I am rolling in a new chain do I still need to mark the chain/sproket relationship? before taking off sprocket. I Think it is off as the chain jumped. also do I need to remove the intake or just unbolt it from the head Im removing?
Here is my partslist maybe you guys can tell me if im missing anything
timing chain
3 guide rails and pins
chain tensioner rail
4 valves seats and guides
head gasket kit
oil tube and plastic parts for tube
With all of you guy's help I think Im off to a pretty good start so
THANK YOU so much.