Cerma anyone - Page 2 - PeachParts Mercedes-Benz Forum

david s poole · #16 07-31-2008, 04:44 PM

KESTAS,just because you haven't seen something with your own eyes doesn't mean that it doesn't exist.most inventions are here because intelligent people decided to think out of the box. you know,throw away all preconceived ideas and start with a clean slate.people used to have bodily harm done to them because they made the statement that the world is round.the computer that you use is probably 1000 times more powerful than the one used for the moon shot.calling me a liar when i tell you what i have witnessed is uncalled for.holding yourself up to be an authority on the behavour of metal and ceramic/glass without showing that you have an open mind is very self centered. i hope that when you are offered a chance to buy a flying car you don't tell them that it can't be done.keep your mind the way it is the rest of the world will soon pass you by.

auh2o · #17 09-19-2009, 04:03 AM

David Poole is a crook and I woild not believe a thing he says. My 190 was stalling out. I suggested a fuel pump problem. I was told that I knew nothing that fuel pumps on Mercedes seldom if ever went bad. After selling me ignition wires fuel filters battery and several hundred dollars. You got it it was the pumps. David had done other work on my car that failed with the results of 150.00 tow from bf egypt to another shop that resulted in all of his bypassed wiring jobs and other incomplerte work being found to the tune of about 1000.00.Stay away from this guy and his shop European Preformance. And like John Hancock. I have no fear in sigining my name..George R. Chapman Dallas, Texas

alabbasi · #18 09-19-2009, 08:49 AM

I would like to say that I have known David or more then 5 years as my mechanic. He was recommended to me at the time by Tom Hanson who now works at the Classic Center in Irvine CA after reading some posts about my frustrations in trying to get the right person to work on my 73 280SEL. That car had many problems with it and was with David for some time while he worked on it. I know that David did not charge me for all the hours that he put into that car in order to get it running.

I now own 10+ MB's and if I have problems that I cannot figure out with my cars, he is the only person that I call. He has always been up front and takes the time to explain the reason that he is going down that path before he does the work. He has saved my bacon on a number of occasions. David is also a big contributor to the technical help section of the forum and I'm sure has helped many people here.

David is also quite easy to work with, I would expect that this should be something that you two can work out off line.