|
|
|
#1
|
||||
|
||||
W108 F I engine swap info desired
I am helping a friend swap in a Fuel Injected 2.8 engine (was carbureted) into his W108. I have the engine in, but would like some information and photos on the following items:
Coolant hose routing and size (injection pump heater?) Fuel pump hoses and routing Where does the temp gauge Sensor go? Vacuum hose routing PCV hose routing How to time the ignition Where does the remote P S reservoir mount? (Had res on top of the pump of carb engine) Oil filter housing check valves location There may be other things, but the above items will help get a lot accomplished. Thanks, Rich
__________________
All Diesel Fleet 1985 R107 300SLD TURBODIESEL 2005 E320 CDI (daily) LOTS of parts for sale! EGR block kit http://www.peachparts.com/shopforum/diesel-discussion/355250-sale-egr-delete-block-off-plate-kit.html 1985 CA emissions 617 owners- You Need This! Sanden style A/C Compressor Mounting Kit for your 616/ 617 For Sale + Install Inst. Sanden Instalation Guide (post 11): http://www.peachparts.com/shopforum/diesel-discussion/367883-sanden-retrofit-installation-guide.html |
#2
|
|||
|
|||
A sbc is an a W108 is an easy swap. Here's my old 280SE.
https://www.youtube.com/watch?v=gyChstIvXK8 |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|