|
Install questions
I have had a couple install questions, and I offer these tips to make the installation easier. When installing the brace, tighten all 2 pan bolts snug to the pan, and then slide the brace on the bolts. You may need to loosen the 3 plate to block bolts to move the plate slightly away from the engine, as it should be tight. Insert the 3/8 bolt and then put on the 3 nuts that hold the brace to the pan. Tighten the pan bolts first, and then the 3/8 bolt. Also, there was one installation where the pan bolt closest to the crank hit the tach pin. A shorter bolt may work. However, I did not have a problem with my own installation (first photo), so this one instance may be an anomaly. No issues with my 240 (616) installation either...Rich
|