The latest revision to the plate makes it a little different than the last batch (Gen 2.0), and I am calling this revision the Gen 2.2. The identifier is that it is painted silver instead of black (the next 50 kits will have the silver plate). There is only a slight difference than the previous units, and may not be noticeable to most people. The belt alignment problem was solved (moved the compressor mounting tabs 1/4 forward), and the adjustment bolt is further away from the adjustment bar for easier turning of the bolt (a socket will fit without rubbing on the bar). Also the adjustment bar tab is the full 1/2" instead of two 1/4" pieces welded together. I just thought I would let everyone know so you are not surprised when you get a silver plate instead of black!.....Rich
