Quote:
Originally Posted by greazer2b
Thanks RollGuy
Due to the break I was unable to just JB weld due to only having 1/4" surface on each side of bolt. Looking at the bolt I can see were a spring would sit.
I didn't find the spring end, plus have driven since it's my only car.
Would you happen to have?
John
|
I am sure I have a spare from a junk IP. I have seen this happen before, and the best fix is a piece of aluminum angle. It is not easy to do, but several people (including me) have done it successfully. It is fastened to the stop screw just to the right. There is a thread here somewhere, but not exactly sure where.