|
Introducing: Gen III Sanden retrofit bracket
This is the third rendition of the Sanden retrofit bracket. I have incorporated several changes/additions to make it stronger. The main plate is 3/8 instead of 5/16. The compressor tabs are 3/8 as well. I also added another adjustment bar at the rear of the compressor. More material has been added to the plate around the forward compressor tab. The compressor will now be mounted with 10mm bolts, instead of 3/8. An additional hole has been added to the rear of the plate for a future rear brace, should one be produced. The Gen III kit will come with a Dayco belt. I will also be offering as an upgrade to the Gen II kit, a Dayco belt for an additional $10. The Gen III kit should be available before next summer. Until then, I have about eleven Gen II kits left. I will post a photo with a compressor mounted on the plate soon......Rich
|