Do 1982 300Ds have rack damper screws?

[Actvs Dei]

Cause I cant find it in my haynes manual.



the problem im having is that it idles rough when warm. like shakes. my mechanic said its probably the fuel or the injectors so hes having me run redline 85 through it for a while to see if it clears up. The rough idle starts after its been driving a while and while stopped will go away if I put the car in neutral. and yes I did a search and found tons of stuff thats why im asking about the rack damper screw. I want to eliminate any and all culprits!



edit: it also goes away if I give it a tiny bit of gas. When the car is accelerating its super smooth.

[tangofox007]

Yes, the '82 has a rack damper. It is at the rear of the injection pump, just forward of the oil filter housing. Looks like a bolt with a locknut. Adjusting it can do wonders for a rough idle.

[Actvs Dei]

is there an online guide on how to install and adjust one? maybe a diagram?

[rg2098]

Originally Posted by Actvs Dei

is there an online guide on how to install and adjust one? maybe a diagram?

Here you go.

http://engine.articles.mbz.org/diesel/rackbolt/

[tangofox007]

To install a new one, just loosen the lock nut and unscrew the pin. You will have to angle it a bit due to the limited clearance between the pump and oil filter housing. When you install the new pin, stop when you feel the pin make contact, then adjust from there.
Here is what the 617 engine service manual has to say about adjustment:
"Loosen the counter nut. Adjust damper at idle speed, screwing damper in until transverse engine vibrations have been remedied. Then tighten counter nut to 20-25 Nm."
My personal experience suggests that better results are obtained with the engine at operating temperature, idling in "drive." If the pin is screwed in too much, the engine will be hard to start. So screw it in just enough to minimize the vibration, then stop.

[boneheaddoctor]

I need to do mine....It idles smooth as silk in neutral...but shakes like a SOB in drive at idle....

[Actvs Dei]

ok guys where the best place to buy one?

[boneheaddoctor]

Originally Posted by Actvs Dei

ok guys where the best place to buy one?

Fastlane............talk to Phil

[Actvs Dei]

Originally Posted by boneheaddoctor

Fastlane............talk to Phil

you're a real help. thanks. lol

[Capt Kirk]

Rack Dampener

Here's a good thread that talks about some of us seasoned member's experience with the rack pin. Might help when you get to installing yours.

(This is not to be construed as me saying you should have searched first, cause I'm sure you did, just wanted to share an oldie)

-Alan

[boneheaddoctor]

Originally Posted by Actvs Dei

you're a real help. thanks. lol

your a newbie so I'll let that slide....see the fastlane button on top of the screen.....click on it....there is a 1-800 number talk to Phill, he sells parts and supports this site in case you were not aware of it....he also has some of the best prices on the net.....and the best customer support around.

[TwitchKitty]

Rack damper is the last thing to check. Do the tuning work first. If you do the rack damper first, please mail me your old rack damper.

[Actvs Dei]

Originally Posted by Capt Kirk

Rack Dampener

Here's a good thread that talks about some of us seasoned member's experience with the rack pin. Might help when you get to installing yours.

(This is not to be construed as me saying you should have searched first, cause I'm sure you did, just wanted to share an oldie)

-Alan

yikes. I dont wanna make it worse.

[Actvs Dei]

Originally Posted by boneheaddoctor

your a newbie so I'll let that slide....see the fastlane button on top of the screen.....click on it....there is a 1-800 number talk to Phill, he sells parts and supports this site in case you were not aware of it....he also has some of the best prices on the net.....and the best customer support around.

yeah I just found this place. Still trying to figure things out. thanks man.