![]() |
|
|
|
#1
|
|||
|
|||
Ignition switch color to number sequence?
I am in the middle of replacing by broken ignition switch - the lock jammed in the column and had to be drilled out - I replaced the tumbler last week thinking that was the issue. The wiring came out of the holder in the back of the switch - does anyone know the wire color to pin number assignments. I didn't see this on the online cd manual or the ignition article on the sticky.
__________________
tgingrich '83 300TD 282k '83 300D 239k '82 300SD 204k DFW |
#2
|
|||
|
|||
I remember seeing it in the wiring diagram for my SDL, it is curious that it isn't in the one for your model.
__________________
Keep everything as simple as possible-but no simpler--Albert Einstein |
#3
|
||||
|
||||
The CD manual is really difficult to read but here's what I see -
both 30s get a thick red wire 50 gets a violet wire with white stripe, possibly also a violet wire 15 gets a red wire with black stripe P30 gets a green wire with white stripe 15X gets a red wire with yellow stripe 15R gets a red wire with green stripe Sixto 95 S420 87 300SDL Last edited by sixto; 07-28-2005 at 01:59 PM. |
![]() |
Bookmarks |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Procedure for Replacing Neutral Safety Switch on 126 Chassis | downeyjc | Tech Help | 2 | 06-20-2008 01:47 AM |
ignition switch help | SomaPusher | Tech Help | 8 | 09-30-2004 09:13 PM |
Cant start engine with ignition switch 83 240D | Carrameow | Tech Help | 9 | 06-01-2003 10:09 PM |
ignition module part number query | koachworks | Tech Help | 2 | 10-20-2002 11:20 PM |
190e Ignition Switch Problems | mbsickness | Tech Help | 2 | 08-19-2002 05:57 PM |