Quote:
Originally Posted by yellit
I forgot to ask what sources you are using that describe the two methods...
|
Several... I took relevant notes with all of them, but I didn't jot down the exact source, unfortunately, for all. One of the 1 drop/sec versions that I looked at is the one provided in the DIY section of this forum... which, by the way, is one of the best I've come across (the pictures accompanying the text help a lot...)
Quote:
I have another manual that states one drop should follow another every 10-15 seconds...so this is a third method for us to throw into the mix....as follows...
One drop every second
One drop every 10 to 15 seconds
One drop every 20 seconds
|
And that's not all...
I did come across one that suggested one drop should follow another every 3 seconds... So there you go, a fourth method thrown into the mix:
One drop every second
One drop every 3 seconds
One drop every 10 to 15 seconds
One drop every 20 seconds
Quote:
The same end result will not be achieved by the above methods....
The difference in timing will be there but very small
You are correct in saying that these values are not the same...
|
THANK YOU VERY, VERY, VERY MUCH!!! (forgive me for raising my voice in my excitement...) You have finally understood what the f*ck I've been talking about all along...
Quote:
The same Timing values are not acheived by the above three methods...
It would be interesting to see how much difference in dynamic numbers would be between the three methods....If I ever get the timing equipment I will get values for all 3 methods ...
I find the same type of difference in manuals describing valve clearance numbers...all a little different but all very close....
I love this forum...it keeps my simple little brain fully engaged...
I hope some other forum members can jump in here to help us on our search for truth and understanding of this mystery....Barry???...Brian..???
We need help here...??!!
|
That's right, my friend, we need help from someone with a solid technical background who understands what the hell we are talking about and who is capable of reading questions thoroughly instead of assuming he knows what is being asked at first glance... Hopefully, that someone will show up and enlighten us all...
03-29-2007, 07:30 PM
Threaded Mode
