|
|
|
|
|
LinkBack | Thread Tools | Display Modes |
#46
|
|||
|
|||
i had a 87 280G run bakwards for a few minutes and the engine still runs very good
|
#47
|
||||
|
||||
Most of the diesels likely "wobble" on shut down backwards a bit. I can feel the rocking of the engine moving back a bit when shutting it off....but I bet any significant amount of reversing the engine would = bad things.
__________________
-diesel is not just a fuel, its a way of life- '15 GLK250 Bluetec 118k - mine - (OC-123,800) '17 Metris(VITO!) - 37k - wifes (OC-41k) '09 Sprinter 3500 Winnebago View - 62k (OC - 67k) '13 ML350 Bluetec - 95k - dad's (OC-98k) '01 SL500 - 103k(km) - dad's (OC-110,000km) '16 E400 4matic Sedan - 148k - Brothers (OC-155k) |
#48
|
|||
|
|||
turning most engines backwards is just plain retarded and asking for trouble.
__________________
1986 300SDL, 211K,Dealership serviced its whole life 1991 190E 2.6(120k) 1983 300D(300k) 1977 300D(211k) |
#49
|
|||
|
|||
I am not sure why Camshaft was specified on the tooth slip...
when I look at the route the chain takes I think the main problem is the probability of the injection timing tooth /chain relationship getting off..... than the cam tooth.
__________________
1980 240d , chain elongation, cam marks reference: http://www.peachparts.com/shopforum/diesel-discussion/10414-help-i-need-check-stretch.html http://www.peachparts.com/shopforum/diesel-discussion/305365-9-degrees-chain-stretch.html evap fin cleaning: http://www.peachparts.com/shopforum/diesel-discussion/156207-photo-step-step-post-showing-w123-evaporator-removal-1983-240d-1982-300td.html?highlight=evaporator A/C thread http://www.peachparts.com/shopforum/diesel-discussion/297462-c-recommendations-mb-vehicles.html |
Bookmarks |
|
|