WTF....It always seems to be something - Page 2 - PeachParts Mercedes-Benz Forum

Simpler=Better · #16 03-04-2009, 10:24 AM

Remove the Alda and overboost setup
If you're worried about overboost get a boost gauge, hook it up where the alda/overboost feed was on the manifold, and mount the gauge into one of your center vents that probably don't work anyways.(no offense, mine dont work either)

If you're super paranoid you can get a setup to set off a buzzer when you hit X psi.

80's old school · #17 03-04-2009, 10:51 AM

Quote:

Originally Posted by Simpler=Better

Remove the Alda and overboost setup
If you're worried about overboost get a boost gauge, hook it up where the alda/overboost feed was on the manifold, and mount the gauge into one of your center vents that probably don't work anyways.(no offense, mine dont work either)

If you're super paranoid you can get a setup to set off a buzzer when you hit X psi.

I took the switchover valve out and ran the boost line straight to the ALDA. Works great.

I will possibly use a boost gage just to be sure. Actually the center vents work great......only because I used a screw from the side of the flapper to hold it open!!!

80's old school · #18 03-04-2009, 10:52 AM

Quote:

Originally Posted by Brian Carlton

Go back and read it again.

Read the section about how to post a new thread and what to put in the title.

OK, I understand what you are saying.

jt20 · #19 03-04-2009, 11:13 AM

Quote:

Originally Posted by 80's old school

I keep repairing things and the more I repair...the more I find broken!!!

What is going on???

I could write a 10 page essay about what I have repaired on this car in 3 months.....

FRUSTRATED!!!

read: "The Web of Life" by Fritjof Capra

It will help you make peace with recurring issue.