The Next couple of pics are how the wires are routed along the driver’s side wheel well.
I ran them along with the existing wiring using the existing factory zip ties.





This pic is where the probe wire connects to the interior wire loom which go through the grommet on the firewall.



This is a shot of inside of the dash with the cluster out. The power window relay mounted behind the instrument cluster gets in the way of the Temperature Display Unit/Box. The instrument cluster will not seat all the way in with the relay in the way.



I ended up taking out the bracket and bending it downward. After repeated testing with the Mock-Up cluster, I finally found the correct position the relay should be in without any interference. I also ended up moving the power window relay to the left slot on the bracket.





Continued..

Attached Thumbnails

         

__________________
1983 123.133 California
- GreaseCar Veg System