New Monarks are in but.....problem - Page 3 - PeachParts Mercedes-Benz Forum

europower · #31 01-10-2011, 11:43 PM

Where can i ge the pre chamber tool?
I have been having a leak on no5, so i replaced heat shield,injector, return line2x and metal lines to injectors 2x and still a small leak,so i have been looking carefully and i see a tiny bubble thru the pc ring.
Heres what my 316k mile w123 injector looked like.
By the way and fyi i took a batch of older injectors i had to my local Bosch center to have them tested and all the old made in Germany ones had even spray pattern and good pressure, a set of neat and clean looking ones that came out of a 150k mile 1985 sd were crap and low pressured,these newer Bosch injectors did not read any country of origin in them.

Diesel911 · #32 01-11-2011, 12:45 AM

Quote:

Originally Posted by europower

Where can i ge the pre chamber tool?
I have been having a leak on no5, so i replaced heat shield,injector, return line2x and metal lines to injectors 2x and still a small leak,so i have been looking carefully and i see a tiny bubble thru the pc ring.
Heres what my 316k mile w123 injector looked like.
By the way and fyi i took a batch of older injectors i had to my local Bosch center to have them tested and all the old made in Germany ones had even spray pattern and good pressure, a set of neat and clean looking ones that came out of a 150k mile 1985 sd were crap and low pressured,these newer Bosch injectors did not read any country of origin in them.

I am selling one.
Note: you need your own Slide Hammer or the largest free rental one from Auto Zone.
Prechamber Ring Removal Tool and Prechamber Puller For Sale

There is mor pics in my ad at benzworld.
http://www.benzworld.org/forums/sale-wanted-trade-giveaway/1536241-prechamber-retainer-ring-removal-tool-prechamber.html