Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Diesel Discussion

Reply
 
LinkBack Thread Tools Display Modes
  #31  
Old 11-15-2010, 07:14 PM
ISO Certified Hard Head
 
Join Date: Feb 2007
Location: Milwaukee, WI
Posts: 200
Billybob,

Wow! Thanks for the detailed description.

From the "oris" diagram, it looks like one needs to remove the factory "nut plates" that are normally behind the sheet metal, and replace them with the
part 30, 23 & 47 sandwich? is that right?

Tripling the thickness of the bearing surfaces around the body would be a substantial improvement -- aside from the tube section carrying the load!

How does the connection between arm #36 and the main beam #23 work?
Is it bolted through the beam?

Quote:
Originally Posted by Billybob View Post
I did mis-remember just a bit, the capacity it was 2400 kg! Here's a pic of the hitch installation info"



....


__________________
--frankb

1982 300TD 617.912 <NLA> . 1975 2002 E10-EFI . 1976 914c6 . 1983 MG LMIII <NLA>. 1988 Montero / 616<NLA> . 2001 TLS . 2005 Saab 9-5 Wagon
Reply With Quote
  #32  
Old 11-15-2010, 10:00 PM
Banned
 
Join Date: Nov 2001
Location: Cape Cod Massachusetts
Posts: 1,427
Quote:
Originally Posted by franklynb View Post
Billybob,

Wow! Thanks for the detailed description.

From the "oris" diagram, it looks like one needs to remove the factory "nut plates" that are normally behind the sheet metal, and replace them with the
part 30, 23 & 47 sandwich? is that right?

Tripling the thickness of the bearing surfaces around the body would be a substantial improvement -- aside from the tube section carrying the load!

How does the connection between arm #36 and the main beam #23 work?
Is it bolted through the beam?
Yes the factory ouside fasteners are two bolts held together by a small sheet metal section, that is removed and in the case of this hitch #41 is placed inside the chassis and two #50 bolts secure the #23 main bar to #41 sandwiching the chassis sheet metal. Part #30 is the same as #31 both are stamped brackets which bolt to the ouside ends of #23 main bar to which the Euro bumper itself is attached.

The connection between the arms #36 & 32 and the #23 main beam is #49 a single M14 bolt with a 19 mm hex head, this bolt passes through the main beam itself and through the end plate which is welded behind it, about 1/2" of steel total! The arms #36 & 32 are fitted with an internal insert welded into place which has a threaded center hole into which # 49 threads. The end of the long cross tube which makes up #23 is cut at an angle allowing access to the head of #49.
Reply With Quote
  #33  
Old 11-21-2010, 06:27 PM
ISO Certified Hard Head
 
Join Date: Feb 2007
Location: Milwaukee, WI
Posts: 200
Found an online copy of the ORIS typ 115/4 manual, a photo of which was posted earlier by Billybob.
Posting for others interested in adapting a real tow hitch to 300TD/123 wagons.

Its here.

Quote:
Originally Posted by Billybob View Post
Yes the factory ouside fasteners are two bolts held together ...
__________________
--frankb

1982 300TD 617.912 <NLA> . 1975 2002 E10-EFI . 1976 914c6 . 1983 MG LMIII <NLA>. 1988 Montero / 616<NLA> . 2001 TLS . 2005 Saab 9-5 Wagon
Reply With Quote
  #34  
Old 12-19-2010, 01:51 PM
have mercy's Avatar
Registered User
 
Join Date: Dec 2007
Location: Hedgesville WV
Posts: 200
light switch

Quote:
Originally Posted by MBeige View Post
It only lights up with the front fogs when the headlight switch is pulled to the 2nd detent.



Definitely a Euro thing!
If it is euro the fog light's can be turned on with with The head light on high beam and low beam.
__________________
30 yr's still in love
Reply With Quote
  #35  
Old 12-19-2010, 05:53 PM
Fattyman's Avatar
Registered User
 
Join Date: Apr 2007
Location: Left Coast
Posts: 547
Quote:
Originally Posted by have mercy View Post
If it is euro the fog light's can be turned on with with The head light on high beam and low beam.
True, It's as if you have 5 headlight settings. Low, High, Low with Fog, High with fog, and last but not least "City Lights"
__________________
'70 F100 shortbed
'82 Diesel Westy
'83 Euro 300TD
Curtlo Viper
Yeti ARC
Surly long haul trucker
Reply With Quote
  #36  
Old 12-20-2010, 10:35 AM
Stevo's Avatar
Registered User
 
Join Date: Apr 2002
Location: NW WA
Posts: 6,299
Quote:
Originally Posted by have mercy View Post
If it is euro the fog light's can be turned on with with The head light on high beam and low beam.
That would mean one could swap in a clear lens and double the "back up lighting" (when needed) without overloading the wiring, sounds good, thanks.

__________________


1985 Euro 240D 5 spd 140K
1979 240D 5 spd, 40K on engine rebuild
1994 Dodge/Cummins, 5 spd, 121K
1964 Allice Chalmers D15 tractor
2014 Kubota L3800 tractor
1964 VW bug

"Lifes too short to drive a boring car"
Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 09:16 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page