Quote:
Originally Posted by destroy
I feel like the "warm" air difference is so negligible that as long as you use a good filter, a DIY intake is better in every way.
I'm still deciding how I'm gonna collect that nasty, oily blowby. I don't like the idea of it going right back into my intake elbow and making a mess of the elbow and the turbo impellor like the stock setup.
Also, what did everyone do with the drain tube back down to the pan?
|
If the temp differential was actually negligible, MB and every other manufacturer wouldn't have made every effort to draw their intake air from outside the engine compartment. MB even made their own specially vented fenders for most 124 diesel engines exactly for this purpose.
As for a catch can, I soldered in a nipple onto the turbo oil drain in order to re-route the captured oil back into the pan. I used a good old fashioned 240D catch can. Try
this for a sleek alternative
11-21-2012, 07:06 PM
Threaded Mode
