My Mityvac no longer works after 18 years and am wondering if anyone has tried the Mityvac rebuild kit?

__________________
92 e300d2.5t
01 e320
05 cdi
85 chev c10

I’ve never rebuilt mine. I have taken them apart and cleaned them out though. I’m kind of a slob and I suck debris into my mityvac periodically. After it gooes up it quits. Cleaning and greasing with silicone o-ring grease gets it working again.

__________________
79 300TD “Old Smokey” AKA “The Mistake” (SOLD)
82 240D stick shift 335k miles (SOLD)
82 300SD 300k miles
85 300D Turbodiesel 170k miles
97 C280 147k miles

They have some economy models now that work pretty well. I needed one in a hurry, I was in a foreign land (Washington state) so I bought one at O’Reillys for about $60 - it’s made out of some kind of high-grade plastic, looks a lot like the aluminum model. Has worked fine so far. I see online Home Depot sells them for $32, Walmart for $38. I don’t know if that’s mail order or on the shelf.

__________________
Te futueo et caballum tuum

1986 300SDL, 362K
1984 300D, 138K

I have an Actron metal handheld vacuum tester I bought in the 1980's. When it stopped holding vacuum, I took it apart and replaced the O-ring on the Piston and it has worked fine for over 10 years.

If something can be rebuilt or not always depends on the failure and if parts are available and the cost is reasonable. Note and sometimes if you need special tools or procedures.

__________________
84 300D, 82 Volvo 244Gl Diesel

I had a plastic Mighty-Mite hand vacuum pump which jammed internally, perhaps from letting some glycol brake fluid or gasoline get past the bleed cup. I recall not finding any way to disassemble it, like the plastic was fused together. I bought it maybe 1990's. Have had the cheaper Harbor metal vac pump since, for over 20 years with no issues.

__________________
1984 & 1985 CA 300D's
1964 & 65 Mopar's - Valiant, Dart, Newport
1996 & 2002 Chrysler minivans

I picked the Acron metal one because I thought the plastic one was going to get damaged somewhere along the line in my work as a mechanic. Getting a metal one proved to be a good choice as I believe over the years it had taken enough abuse that would have ruined the plastic one.

I have gotten diesel fuel and brake fluid inside of mine.

Just looked the Harbor Freight handheld vacuum pump with the plastic brake bleeding stuff is $25. The Home Depot rebuild kit for the Mighty Vac is about $18

__________________
84 300D, 82 Volvo 244Gl Diesel

Well, out of curiosity I looked on eBay the newest Actron ones are made in the PRC; my one from the 1980's is US made.
When I blew up eBay pic of the bubble pack it also has Bosch Automotive Service Solutions LLC on it.

__________________
84 300D, 82 Volvo 244Gl Diesel