Quote:
Originally Posted by 95e300dwez
Yeah I machined the header flange myself I am a journeyman tool and die maker I welded the header and exhaust. The boost is alright while driving it I get 5 psi by 2500 and 15 at 4000 to 4500 so I only have it for a 1000 rpms but she really pulls. Free revving to 4500 in park I can only about 5-6 psi. Driving at 70 I get about 6 psi and she pulls allot better on the hills here in Portland nice big grades to check the torque.
|
Very interesting!! I'm glad someone has installed one of these... The boost numbers are interesting, and I can't wait to see how quick it spools with the pump turned up.
Would you be interested in selling the flanges and the oval cones?
Quote:
Originally Posted by 95e300dwez
Thanks for the tip on the coolant first merc. didn't know there was a diff.
|
No prob!
The proper stuff is either from the dealer ($20/gallon) or
Zerex G-05. The only place I know of to get the Zerex is at NAPA... Unfortunately you have to order a whole case of six if they don't have it in stock ($10/gallon). That isn't a big deal for me since I have lots of MB's... dunno if it is for you or not.
Quote:
Originally Posted by 95e300dwez
Well the start mileage is 22400 I think it should hold together jemmu said the internals are good for 300 hp.
|
I would just keep your EGTs a little lower than what the turbo engine can handle and you should be fine. That's My $.02 anyway!
03-25-2010, 05:43 PM
Threaded Mode
