I mostly hang out in Diesel Discussion. I usually post there, but a friend asked me to work on his Sprinter chassis motor home, so I figured I would post here. The rear brakes were down to the sensors. New parts (Zimmerman) were procured, and I did the job today. After removing the rear dual wheels, I loosened the bolts (19mm) holding the rotor and wheel mounting flange. I then removed the caliper bolts (15mm) and mounting bracket bolts (24mm). I removed the sensor wire so the caliper could hang out of the way. A little hammering on the rotor loosened it enough to be able to remove it and the flange.

Attached Thumbnails

       

__________________

All Diesel Fleet
1985 R107 300SLD TURBODIESEL
2005 E320 CDI (daily)

LOTS of parts for sale!


EGR block kit
http://www.peachparts.com/shopforum/diesel-discussion/355250-sale-egr-delete-block-off-plate-kit.html

1985 CA emissions 617 owners- You Need This!
Sanden style A/C Compressor Mounting Kit for your 616/ 617 For Sale + Install Inst.

Sanden Instalation Guide (post 11):
http://www.peachparts.com/shopforum/diesel-discussion/367883-sanden-retrofit-installation-guide.html