Firstly, why are you removing the shower arm to be able to remove the shower head? The head is certainly removable from the arm. Most of them are plastic and don't really grip the shower arm very tightly. A pipe wrench will certainly loosen it.

On the older heads, which may be all brass, you might need two wrenches.......one on the shower head and one on the arm.

Well the shower head I'm replacing uses this little chrome ball that threads onto the shower arm/pipe. That little ball thing is about a 100 times harder to get a grip on, so I figured replace the entire arm instead. Didn't think it was going to be such a PITA.

I guess I'll try a pipe wrench, don't have one of those. I figured the vise grips or channel locks could grip better than anything.

__________________
-justin

1987 300TD, 1987 300TD
2008 R32, 2000 Passat Wagon

Something isn't right. Those chrome balls allow the head to swivel. They live inside the threaded portion. You remove the threaded portion on the head and the ball will come with the head. The ball is not installed as a separate device.

Nothing beats the grip of a pipe wrench on a pipe without flats. You might want to put a piece of material under the jaws.........they can do some real damage to the chrome...........unfortunately.

See for yourself and decide. You can see I've already scratched through the chrome. Let's see how long it can go without "the comment"

Attached Thumbnails

 

__________________
-justin

1987 300TD, 1987 300TD
2008 R32, 2000 Passat Wagon

i hate to say what that chrome penis looks like.... a chrome penis.

yeah, try a pipe wrench. they are the most powerful up to the point they start crushing the pipe.

you may need heat.

tom w

__________________
[SIGPIC] Diesel loving autocrossing grandpa Architect. 08 Dodge 3/4 ton with Cummins & six speed; I have had about 35 benzes. I have a 39 Studebaker Coupe Express pickup in which I have had installed a 617 turbo and a five speed manual.[SIGPIC]

..I also have a 427 Cobra replica with an aluminum chassis.

im dyin' over here

__________________
1985 CA 300D Turbo , 213K mi

You're damn lucky that your two friends are asleep.........

Yeah, also, remember to put a rubber on it before using the wrench so it doesn't get hurt. Than warm it up with some KY Warming Lubricant.

__________________
" We have nothing to fear but the main stream media itself . . . ."- Adapted from Franklin D Roosevelt for the 21st century

OBK #55

1998 Lincoln Continental - Sold
Max 1984 300TD 285,000 miles - Sold
The Dee8gonator 1987 560SEC 196,000 miles - Sold
Orgasmatron - 2006 CLS500 90,000 miles
2002 C320 Wagon 122,000 miles
2016 AMG GTS 12,000 miles

Yep, that's the old style arm and the ball is not removable from the arm.......it's all one piece. The ball is now damaged, so, you've got to remove and replace the arm........and it's probably been in there for 40 years. Not a terrific task.

You probably have iron pipes coming up the wall to the shower head. If so, they can take the torque that you're going to have to use to get that arm loose. You'll definitely need pipe wrench, and, hopefully, you won't break the fitting in the wall. But, at that age, nothing is certain. Can you remove the one tile around the arm and get to the fitting? A good bit of heat from a propane torch will make short work of getting it out without damage.

Have you looked behind the escutcheon to see what the fitting in the wall looks like? You could always spray a penetrating oil into those threads.

__________________
1977 300d 70k--sold 08
1985 300TD 185k+
1984 307d 126k--sold 8/03
1985 409d 65k--sold 06
1984 300SD 315k--daughter's car
1979 300SD 122k--sold 2/11
1999 Fuso FG Expedition Camper
1993 GMC Sierra 6.5 TD 4x4
1982 Bluebird Wanderlodge CAT 3208--Sold 2/13

Ok, great. Yes it's almost a 60 year old home. My wife and I just bought it two weeks ago and we've got one of those detachable shower head things and I need to get it hooked up. All the plumbing in the house has been updated to copper, but I think they might have bypassed the shower head based on what you're telling me.

The ball may look damaged but the shower head that is there works fine for the most part. It's funny, nobody at Home Depot knew there was such a thing as a shower arm with the ball fixed to the arm.

I have a torch too and I was thinking about using it today, but then I got worried that the wall behind the tile would catch on fire. I'll try to pop that center tile out and get a better look.

__________________
-justin

1987 300TD, 1987 300TD
2008 R32, 2000 Passat Wagon

In the old days of plaster, the hole might be large enough behind the chrome plate to get a torch in there. If not, you can open it up a bit........or you can remove the tile and open it up more. But, be careful that you don't destroy the tile.

Yes, you can catch the inside of the wall on fire. The old houses have wood lathe behind the wall. So, be ready with a fire extinguisher that has a hose.......or be ready with a garden hose.......just in case.

If you do get the torch in there, heat the outside of the fitting........do not heat the chrome pipe at any time.

.......made it for three minutes........not too bad........heh?