Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help




Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 10-26-2000, 04:24 AM
Zorro
Guest
 
Posts: n/a
My apologies for repeating my earlier (unanswered) post, but surely there is someone out there who has done this work before, I think.......? Vehicle is concours so I do not want to blunder in and create problems by getting it wrong.

"I wish to remove all the brightwork mouldings and rubbers from the front pillars to permit pillar sanding, repainting, and replacement of some mouldings & rubbers. (The front pillar moulding extends back along the roof edge to form the rain gutter). I have genuine factory workshop manuals and parts microfiche, but the procedure for removing these specific components is not covered, nor is it readily apparent upon inspection. The local franchise dealerships and bodyshops are of no help as they have not done this type of work before either. Can anyone assist by providing a detailed sequential listing of the steps required?

Thanks, in anticipation, Zorro".
Reply With Quote
  #2  
Old 10-26-2000, 06:08 AM
WDurrance
Guest
 
Posts: n/a
Take a pick-iool and peel back the rubber at the edge of the molding next to the windshield glass. There should be a series of phillips-head screws that hold the molding in place.
Regards,
Randy D.

------------------
W.R.Durrance
ASE Master Tech
Mercedes Tech 21 Years
68 250SE
68 SAAB 96 Ice Racer
69 300SEL 6.3
70 300SEL 3.5
81 300TDT
W.R.Durrance Engineering
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
1975 450SLC Transmission mod????? cgoodwin Tech Help 5 04-11-2004 07:30 PM
77 450slc curlyman SL Forum 3 05-21-2002 04:26 AM
WANTED: Front & rear seats for a '75 450SLC (and other interior stuff.) Kyle72 SL Forum 1 01-22-2002 05:48 PM
Raised back on a 450SLC revray Tech Help 1 11-15-2001 05:22 PM



All times are GMT -4. The time now is 05:15 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2011 Pelican Parts - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page