Parts Catalog Accessories Catalog Tech Info Tech Forums
  Search our site:    
 Cart  | Project List | Order Status | Help    

Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

LinkBack Thread Tools Display Modes
Old 11-01-2000, 03:50 PM
Posts: n/a
I need to replace the rear bumper pad not the whole bumper, on a 1989 300E. I was wondering if anyone could help me out and tell me the steps which are requiered to do this before I start something which I might not be able to finish. Any help would be apreciated.

Reply With Quote
Old 11-01-2000, 04:01 PM
Posts: n/a
If you are talking about the rear impact strip, here is the part number: 124-885-03-21

I have not yet done this but ordered this part recently. Let us know!
Reply With Quote
Old 11-01-2000, 07:53 PM
Registered User
Join Date: Jan 2000
Location: New Bedford, MA USA
Posts: 1,583
You will have to remove the plastic bumper shroud. The ends can be gotten from inside the trunk behind the trunk liner. The center retainer hardware can be removed from under the car. Be careful when removing the plastic shroud. It is large, wobbles around and in your case is 11+ years old (prone to breakage). The impact strip can be removed after you remove the plastic shroud. Good luck..

Jeff Lawrence
1989 300e
2000 Dodge Grand Caravan SE

[This message has been edited by jeffsr (edited 11-01-2000).]
Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Genuine Brand new Wald rear bumper for W210 The Godfather Mercedes Used Parts For Sale & Wanted 0 12-13-2004 07:14 AM
bumper pad janko Diesel Discussion 1 11-19-2003 09:49 PM
Rear Bumper (fell off) floydo Diesel Discussion 12 04-06-2003 09:01 PM
Replacing chrome bumper trim Snibble Open Discussion 4 09-06-2002 08:47 PM
Rear brake pad sensors? DieselHead Diesel Discussion 7 02-02-2002 10:34 PM

All times are GMT -4. The time now is 10:24 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2016, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2011 Pelican Parts - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page