![]() |
|
|
|
#1
|
|||
|
|||
![]()
I thought I had a bad A/C relay (002 545 13 05). I replaced the A/C relay, but the compressor still does not engage. I initially thought it was the relay, because when I removed it and hot wired port #5 to port #7 the compressor clutch engages. So, I guess the problem is whatever tells the A/C relay to activate the compressor. Can anyone help?
When I jump the A/C relay ports 5 to 7 the air conditioning runs fine. But, the compressor runs constantly, and that is certainly not a satisfactory fix. Last edited by boyd searer; 06-08-2005 at 08:46 AM. Reason: Better discription of problem. |
Bookmarks |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
What should I look for in a 300E fuel problem? | architect1803 | Tech Help | 9 | 07-12-2008 08:15 AM |
93 300e A/C problem, hot air side vents, cold air center vents | mononucleusque | Tech Help | 2 | 04-21-2005 01:23 PM |
Sticky Fuel Distributor in 1987 300E | Walter Ebner | Tech Help | 3 | 07-02-2003 12:21 PM |
300E Difficult Hot Starts Problem Solved | elkadi | Tech Help | 5 | 08-28-2002 10:48 PM |
1987 300E Seat Problem | Ronald Pantin | Tech Help | 2 | 04-20-1999 09:38 PM |