Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help

Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

LinkBack Thread Tools Display Modes
Old 01-11-2001, 07:36 PM
Posts: n/a
has anyone tried a cup holder from this retailer? (

1) if so, how hard was the installation? would i have to remove the door panel?

2) if not, could you make a suggestion as to where i can get a good cup holder?


Reply With Quote
Old 01-11-2001, 08:15 PM
Posts: n/a
Same 1, it is not hard at all. I used Makita drill and bolted on. U can order directly from the manufacturer, but it is the same price as BHMA. Mine costed about $50 with shipping. If u go to the dealer, they have the same thing, but charge u twice as much. Saw it last year and wanted it, but at $100. That is way too much. It took about 2 mins to install. Positioning it is the hard part. Also, it may hinder when u want to open and close door, if cup is big and in holder. I don't have the URL, but i think it was They also have one that fits 2 drinks underneath the arm rester in that console, but u can get the same thing at any Japanese car mod store, but not same color as interior, for about 1/3 price. I didn't want that, b/c I use that space to hold misc. junk. Look at the pics closely and see if u want this or not, but it works well 4 me.
Reply With Quote
Old 01-11-2001, 08:31 PM
Posts: n/a

if you are using a drill to just bolt it on, isn't there a possible danger of drilling through wires, etc? is there a specific place where it's "safe" to drill through?
Reply With Quote
Old 01-11-2001, 09:25 PM
CJ CJ is offline
Registered User
Join Date: Jun 2000
Location: Earth
Posts: 1,318
I got mine form ************************ for about $35.00. Verysimple to put in, the directions show where and how. Total install time 10 minutes.
Reply With Quote
Old 01-12-2001, 06:13 AM
Ashman's Avatar
Registered User
Join Date: Sep 2000
Location: Sherman Oaks, CA
Posts: 4,749
Those ones for the door are fine. I've found BHMA to have very nice products, though the prices on some seems a bit outrageous. Too bad they really trimmed down their business. They used to have tons of great car stuff for many different cars, its seems that now they only really do building and sales of custom built suburbans, yukons and escalades, and sell newer mercedes items. They seem to be slowly getting rid of all the interior stuff and other items for the older cars.

you can also try

they have a center console cup holder.

'92 300CE - Sold
2004 C240 - 744 - C7 Wheels - Android Radio
2002 C320 - 816 - Sport Wagon
Reply With Quote
Old 01-13-2001, 04:53 PM
longston's Avatar
Another View. . .
Join Date: Dec 2000
Location: Mark West, CA
Posts: 787
WOW, I Got The Same One...


The guy who sold me my car installed one of these (they all seem to be the same) on the front driver's side door panel. The upside is that is was a real good match to the existing interior. The downside is that I hate it, and wish that he hadn't put it in. To me, it's just in the way, and if I do remove it, there are the three screw holes left in my door panel...(yes, I know there are four holes, but following the directions, he only used three screws.)

BTW, he told me he bought it from the local MB dealer, and paid about $40 for it.

Remember kids, don't drink and drive. But, if you must drive, do so responsibly
"We drive into the future using only our rearview mirror."
- Marshall McLuhan -

Scott Longston
Northern California Wine Country...
"Turbos whistle, grapes wine..."
Reply With Quote
Old 01-13-2001, 09:54 PM
Posts: n/a
Drink Holders

I checked out the web address listed on Wyoo post and it looks exactly like the one's sold at Wal-Mart for $4.99. Look either in the Auto or the Marine/Fishing sections. I have two installed in my 300D and used self adhesive Velcro to attach, no screws needed.
Reply With Quote
Old 01-14-2001, 03:20 AM
Posts: n/a
The bolts are short and come with the cupholder. If you are afraid, then you can take apart the door panel, but I wouldn't bother and I don't think the dealer would either.

Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Cup Holder for R129-SL's 1990-1995 geno Mercedes-Benz Used Parts For Sale & Wanted 1 07-21-2004 06:08 PM
ML rear cup holder bracket airdam ML, GL, G-Wagen, R-Class, Unimog, Sprinter 0 02-14-2004 04:19 AM
Cup Holder geno Mercedes-Benz SL Discussion Forum 14 01-10-2004 07:15 PM
Looking for center console cup holder for 500SL spinedoc Mercedes-Benz SL Discussion Forum 10 04-05-2003 11:48 PM
A great after-market cup holder suginami Tech Help 34 01-12-2002 06:13 PM

All times are GMT -4. The time now is 08:01 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2023, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page