Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 07-06-2005, 10:59 PM
TheV12pwr's Avatar
Registered User
 
Join Date: Dec 2004
Posts: 220
96' SL500 soft top issue!

Top opens fine all the way/light on the switch is "off"/ when trying to close goes all the way but will not lock on the front latches,pulling the back lid will help the top to lock on the front,but when cycle is complete the light on the top switch is still 'on' saying the cycle is not complete
Any ideas?
Thank You

__________________
DRIVE IT LIKE YOU STOLE IT!
Reply With Quote
  #2  
Old 07-12-2005, 06:04 PM
Registered User
 
Join Date: May 2001
Location: Las Vegas, Atlanta
Posts: 669
I didn't completely understand what you wrote, but if the light remains on when the operation is finished it means that the controller is not getting feedback from all of the latches that they are locked. You might be able to tell which one it is by looking. Otherwise, you will have to check for the signals at the connector to the controller.

Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
SL500 Soft Top Mechanism Lubrication billwrb Mercedes-Benz SL Discussion Forum 0 04-11-2005 10:26 AM
96 sl600, soft top & roll bar Morrissey Tech Help 1 04-08-2005 07:38 AM
used or new soft top replacement? domchang Mercedes-Benz SL Discussion Forum 10 12-04-2004 05:29 PM
500 sl soft top problems. rjcamp Mercedes-Benz SL Discussion Forum 3 07-11-2003 05:19 PM
cracked plastic rear window in soft top emilo Mercedes-Benz SL Discussion Forum 3 04-29-2003 05:09 AM



All times are GMT -4. The time now is 09:33 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page