Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help




Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 02-12-2001, 08:58 AM
clnsy
Guest
 
Posts: n/a
I need some help with my 71 250CE. 1. I am seeking a source in Canada for technical manuals as well as parts for this model (it was never imported into the US). 2. I have replaced nearly every component of the cold start system or at least tested the rest. The car starts very hard cold (unless I adjust the manifold pressure regulator or advance the timing by 10 degrees) and once running the car runs extremely rich, stalls when the accelerator is depressed (unless pump in short fast strokes) and after 10 minutes of running this way the plugs are fouled (#1 and 2# are wet - gas not oil) and the oil is contaminated with gas.

The car has a history of constantly having points/plugs replaced. I had the head pulled and new valve guides put in and the head checked by a specialised MB machine shop, the injectors were replaced within the last 25,000 miles, and the cold start valve is working as specified. I also replaced the fuel pressure regulator and it is now running within spec.

Any help would be greatly appreciated as my mechanic is confounded (30 year MB mechanic) and my local MB dealer has no idea what to do on a 6 cyl EFI car of this vintage.

This car has the early Bosch Djetronic injection system (same as the 4.5 and 3.5 108/109's).


Many Thanks

Chris M
71 250CE
Reply With Quote
  #2  
Old 02-13-2001, 10:34 PM
clnsy
Guest
 
Posts: n/a
250CE - Someone must have one of these....

Beasts - Any help, advice, admonishment, encouragement. etc would be gratefully received. I am getting a bit desperate here.


thanks


Chris M
Reply With Quote
  #3  
Old 10-20-2001, 06:17 AM
dpatterson's Avatar
Registered User
 
Join Date: Jul 2001
Location: Brisbane, Australia
Posts: 82
250ce

Chris,
Can't help with your problem but was interested to know if you found any useful manuals, CDs etc.
I have a '71 250CE with a rusty floor and a '73 250C with a clagged motor. I'm in the middle of pulling the CE engine to install into the 250C car. As you might have guessed this is proving to be something of a mission and any info would be equally desperately appreciated.

Regards,
Daryl
Sydney, Australia
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Austin, Texas shop info needed. Mack Diesel Discussion 6 10-05-2004 10:24 AM
Foreign and Domestic Oil no longer needed... moparmike Off-Topic Discussion 5 09-04-2003 09:13 PM
280CE transmission advice needed yorktown5 Tech Help 1 07-31-2003 04:25 PM
HELP! with my 250CE Mr.250CE Vintage Mercedes 4 04-08-2002 08:22 AM
250CE - Distributor needed clnsy Tech Help 4 03-19-2001 03:46 PM



All times are GMT -4. The time now is 02:23 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2011 Pelican Parts - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page