Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help




Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 03-08-2001, 07:13 PM
Aymn
Guest
 
Posts: n/a
Hi
I have changed my transmission oil on my 84 300D and I am confused about adjusting the level and I want the detailed procedure to do that like is it measured when cold or hot, before driving or after driving and if after driving how long should I wait, thanks for your help.
Reply With Quote
  #2  
Old 03-08-2001, 07:26 PM
Registered User
 
Join Date: Jan 2001
Location: Santa Clara, CA
Posts: 427
Car at idle for 2 minutes, on level ground, in Park. If just warm, ATF @ 86 degrees F = 0.2 inches BELOW minimum mark. If hot after a good run, ATF @176 degrees F, it should meet the full mark. Don't overfill!!!
__________________
'76 240D-Sold
'78 240D-Sold
'85 300 SD, 165K-Sold
'88 300 TE, 165K-Sold
'64 Porsche 356C Cabriolet
'86 560SL 124K Miles
'94 320E Wagon, 74K Miles-128K Miles JUNKED
'06 E350 Wagon, 84K Miles
Reply With Quote
  #3  
Old 03-08-2001, 07:46 PM
Aymn
Guest
 
Posts: n/a
Hi Ron
so should I measure it right away after stopping or do I have to wait like engine oil, thanks.
Reply With Quote
  #4  
Old 03-09-2001, 01:39 AM
Hazen's Avatar
Registered User
 
Join Date: Jan 2001
Location: Redmond, WA
Posts: 57
Aymn,
Checking ATF level is done with the car in Park and the engine running at idle. Waiting isn't necessary.
One waits to check the engine oil after shutting down the engine so as to allow the oil to flow from the top of the engine down to the oil pan by our good freind gravity.
Best,

[Edited by Hazen on 03-09-2001 at 12:44 AM]
__________________
Hazen Arnold
Happiness is a well stocked
garage.
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
What's up with my ATF level? chazola Tech Help 2 11-21-2003 03:15 AM
500E Radiator Replacement? placo1 Performance Paddock 12 09-29-2003 07:35 PM
'97 C230/722.6 tranny ATF level monitored? anthonyb Tech Help 7 04-08-2003 08:25 AM
Quick question about measuring ATF level. carman850 Tech Help 6 11-04-2001 10:05 PM
ATF Correct Level Question joel Tech Help 4 05-05-2000 01:11 PM



All times are GMT -4. The time now is 02:10 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2011 Pelican Parts - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page