![]() |
|
|
|
#2
|
|||
|
|||
Vacuum Check
You can check the vacuum by putting a vacuum gauge at
that port and see what the reading is. Also, you can use Mity Vac (available at several stores) and pull vacuum on those ports and see if is holding the vacuum. Good Luck |
Bookmarks |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
240D shakey at idle, fast idle, how to adjust?? | unkl300d | Diesel Discussion | 4 | 10-19-2003 08:39 PM |
E320 Rough Idle / Egr Problem | earossi | Tech Help | 13 | 09-22-2003 09:14 AM |
fast idle horror | 84euro500 | Tech Help | 1 | 05-04-2003 09:21 PM |
560SEL hard start /low rough idle | algae1 | Tech Help | 0 | 05-30-2002 09:49 AM |
400E rough idle problem finally solved | carman850 | Tech Help | 1 | 04-19-2002 07:38 PM |