Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

 
 
LinkBack Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 04-04-2001, 11:48 PM
Billy B
Guest
 
Posts: n/a
I just bought a nice 1985 190E that had been (improperly) stored for 7 years. It reportedly has a blown head gasket though no water in oil or vice versa. I could use some help to see if I have forgotten some items to service. I thought I would change (flush) the brake fluid, engine oil, coolant, filters, clean up all the fuse contacts (there is no fusebox cover) and replace the porcelain fuses with glass type. I'll inspect and replace any rubber hoses or belts that are showing age or wear. Then I figure I'll need to drain the gas tank, install a filter before the fuel pump (is it outside the tank?) and flush the fuel line with several gallons of fresh gas or lacquer thinner. Should I buy one of those flush the fuel rail and injector kits? Am I forgetting anything important? Should I drain and change fluid and filter in automatic trans?

Thanks for any help.

Bill Buttermore

1985 190E 109K
1988 Caravan 223K
1989 Crown Vic Police 196K
1989 Toyota Camry 233K
Reply With Quote
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
86 190E 2.3 - Tach, clock affected by fastening seat belt DieselGuy Tech Help 5 01-22-2003 02:51 AM
Need help with part numbers 1985 190E 2.3 8v odelag Tech Help 0 06-16-2002 01:23 PM
Options for new steering wheel 1985 190E 2.3 8v odelag Tech Help 2 05-24-2002 06:20 PM
1985 Mercedes Benz 190E 2.3 For Sale. Steve190E 2.3 Mercedes-Benz Used Parts For Sale & Wanted 0 10-02-2000 09:47 PM
is it possible to put a 16 v 190e into a 190e 2.3? mr benz Mercedes-Benz Performance Paddock 2 03-04-2000 06:48 AM



All times are GMT -4. The time now is 01:55 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page