Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help




Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 04-07-2001, 11:09 PM
ARJAY
Guest
 
Posts: n/a
I have a '95 C280 with the M104 engine. I was checking the coolant level and noticed a few small (1-2mm diameter)oil slicks floating around in the coolant. Is this the begining of the infamous M104 head gasket problem? I don't know where else oil could enter the cooling system. There is no coolant in the oil and the car runs fine. (no over-heating or other problems). The head gasket was replaced under warranty at 33,000 miles by the previous owner. The vehicle now has 92,000. (no extened warranty). Any technical advice would be appreciated.
Reply With Quote
  #2  
Old 04-07-2001, 11:40 PM
Registered User
 
Join Date: Jan 2000
Location: New Bedford, MA USA
Posts: 1,583
Keep an eye on it. May be left over from previous casualty. Flush cooling system with water and a detergent. Donnie suggested SHOUT to me back when my head gasket let go. Refill and watch it close.
__________________
Jeff Lawrence
1989 300e
2000 Dodge Grand Caravan SE
No matter what you fix, there will always be something else to fix..
"Warranty" is just another way of postponing the inevitable.
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
oil change wyoo Tech Help 43 03-29-2017 03:54 PM
The oil debate again What do you think of this dpbrowne Diesel Discussion 101 04-01-2005 03:33 PM
A Frantz oil filter will be going on my 603 this winter! Hatterasguy Diesel Discussion 50 09-16-2004 10:14 PM
Oil leak under intake manifold! Engine M104 johan6504 Tech Help 9 12-04-2003 12:26 PM
Foreign and Domestic Oil no longer needed... moparmike Off-Topic Discussion 5 09-04-2003 09:13 PM



All times are GMT -4. The time now is 03:22 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2011 Pelican Parts - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page