|
|
|
#1
|
|||
|
|||
How do I go about removing the door panels in a 1991 420 SEL?
When I open the drivers side window the door panel bulges out for a second and there is a slight rattle in the door. Any ideas before I open it up? |
#2
|
|||
|
|||
the normal way
Just unscrew the lock button from top, remove all handles (Phillips screws), gently remove from door careful not to break pins around door trim and you should have it .
Is your window electric? If so maybe the motor has come loose my rear window on my wagon had simmilar problem and I had to replace the winding mechanism worn out, pain in the bum to do , be careful can be sharp if worn or maybe motor needs replacing . Good luck ;-) regards BB W123 wagon
__________________
BB W123 280Te 1982 Modified & still going W210 190E 1990 (Wifes Car) W116 350 se sold W116 280 se sold |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
126 wood trim removal (how to) | SD Blue | Diesel Discussion | 1 | 08-09-2004 04:19 PM |
126 valve cover removal ! straightforward?? | Theurig | Tech Help | 4 | 04-24-2004 06:55 AM |
126 Front bumper chrome removal | Lou K | Tech Help | 1 | 07-30-2003 01:18 PM |
126 dash removal | sixto | Diesel Discussion | 5 | 02-20-2003 03:48 PM |
126 center console removal | 300SDL | Car Audio and Multimedia | 2 | 04-20-2002 09:57 PM |