|
|
|
|
|
#1
08-01-2001, 09:28 AM
|
|||
|
|||
|
a/c condensor efficiency?
I would like to know if there is a way to check the condensor efficiency of my 134 converted 2.3-16. At idle, it cools ok with the temps outside around 95 F. When moving, the temp gets a bit colder. Can the r-12 condensor be less efficient? Does a new 134 condensor have more cooling fins across the tubes? And does the expansion valve need to be changed to a 134 expansion valve? What, exactly, is the difference in the two expansion valves? Thanks, Joe
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| '84 300SD W126 - A/C clicks off dead once it reaches dialed in temp | bodyart27 | Diesel Discussion | 7 | 08-12-2005 03:19 PM |
| Winters over and A/C season begins | pdxman | Diesel Discussion | 7 | 03-13-2004 01:38 PM |
| 91 300SEL - Idle drops when A/C is on | Mike Murrell | Tech Help | 2 | 09-05-2003 08:27 AM |
| '84 300SD W126 - A/C Question - the saga continues | bodyart27 | Diesel Discussion | 13 | 06-23-2003 05:32 PM |
| Bad odor from A/C and Refrigerant leakage | Holson Adi | Tech Help | 5 | 01-17-2003 02:00 PM |
Threaded Mode
