|
|
|
#1
|
|||
|
|||
cold start-black smoke
Hi everyone,
This MB site is getting better all the time! I just love it! Can anyone tell me why my 450SL with 130,000 starts great but blows black smoke for about 30sec. and then runs great? It only happens when it sits overnight. Thanks turboSD |
#2
|
|||
|
|||
Possibly, the injector(s) is leaking fuel after the engine is off.
David |
#3
|
|||
|
|||
Hey turbo sd
This seems to be a simple answer to your question but how long are you glow plugging your diesel. If you turn the key right after the light goes out that might not be enough to prevent rough smokey starts. I researched the sight and my cd and found out that the plugs stay on for about 20 to 30 seconds. I was under the impression before that the plugs went out right after the light went out... so I would turn it over after about 3 to 5 seconds of glow plugging. My diesel would rival champion louisianna smoker barbaque. Now I dont really mind alot of smoke but I was concerned that the car might not start when it goes below 70 hear in steamy chicago. Now I glow plug it for a good ten count and it starts alot easier without the two minute great american smoke off. I am alot happier with the diesel. Good luck bob |
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
67 250se coupe cold start solenoid | grezm0nkey | Vintage Mercedes Forum | 2 | 01-17-2005 08:59 AM |
Black Smoke at 1st Start of Engine in the morning | 84W123DT | Diesel Discussion | 3 | 08-17-2004 03:25 PM |
cold start problem C36 M104 | ke6dcj | Tech Help | 3 | 07-30-2004 08:21 PM |
190e voltage regulator, cold start valve, EHA | Machnumber2 | Tech Help | 1 | 08-29-2002 07:50 PM |