Quote:
|
Originally Posted by sal
rewired the ETA unit from the circuit board back. The unit looked ok visualy,including the potentiameter. Is there any test you can do electricaly on the ETA?
|
Not sure what that means?? "from the ckt board 'back'"?? Do you mean from the ckt board to the output connector?? If yes, did you rewire the pins in the connector??
There are tests but you need somebody who has a "jig" to properly test the ETA's operation. One such place is "Beckmann" (link in MENU#24). They charge $40 to test one. If you have a "working" car similar to yours, you could test it in-situ . . but that's alot of work.
So you DIDN'T replace the wiring harness?? If not, that should be done asap. Actually it should have been done first!
03-25-2008, 03:08 PM
Threaded Mode
