Quote:
Originally Posted by markg612
Caliper and rotor off, center hub nut off, parking brake shoes off, 3 5-mm hex nuts that hold the backing plate off, all five links at the hub, off. This is a 1 hour job for the less rusty, more if heat and penetrate is needed. The magic trick here is to ensure the backing plate is broken loose from the hub center and spins freely, this will make link removal very easy. (bolt head access is simplified.)
|
Ok, I got the hub nut off, parking brake shoes off (I dont know how they are going to go back on, tough to squeeze behind the hub) backing plate unbolted and loose, all 5 link nuts/bolts loose, but the parking brake cable through the back of the carrier is through a circle hole, and the end of the cable has a pivot mechanism that is not going to fit through it! Any ideas? Thanks
__________________
1986 190D, 2.5L, 5-speed swap, 180,000 Miles (60K by me).
Jeep CJ-7 with Cummins 4BT/NV4500/AtlastII 4.3.
Grand Wagoneer 4BT project in progress!
|
02-19-2009, 03:55 PM
Threaded Mode
