Quote:
Originally Posted by macdrone
Use a 1.1K resistor inline eith the 2 prong engine temp sensor to turn the aux fans on 10-15 degrees cooler than usual. They will run more frequently but will keep you cool.
|
The details are really crucial here. Adding an 1100 ohm resistor inline with the temp sensor will raise not lower the temperature trigger point. The resistor must be in parallel with the temp sensor. Also the 1100 ohm value is specific to the M119. 700 ohm on the M103 brings the trigger temp from 105c to 90c.
05-24-2010, 12:04 AM
Hybrid Mode
