Cruise Amp On 300E

Hello,

I noticed a post on cruise control amplifier removal. I have an 87 300e and the amp is under the dash left of the steering. I’m going to have to remove the lower dash. Before I break something I was hopping someone could give me some pointers.

How do you remove the headlight switch?

How do you remove the black trim?

I understand the amp is held by two screws to a bracket. The bracket is held by a 10 mm bolt. From under the dash I can put my hand on one screw on the passenger side on the bracket. Is the 10mm bolt on the passenger side of the bracket, center. or driver side of the amp?